Why is thickness important for shower door seal strip selection?

When you pick a shower door seal strip, thickness is not something you can ignore. Think about it if the seal strip is too thin it won’t be able to fill the gaps between the shower door and the frame well. Water will easily seep through those small gaps when you take a shower, leaving the bathroom floor all wet. But a properly thick shower door seal strip can fit tightly into the gaps. It acts like a barrier that stops water from leaking out. For example, if your shower door glass is 8mm thick, choosing a shower door seal strip with a matching thickness will make sure the seal is tight. You won’t have to wipe the floor after every shower, which saves you a lot of trouble.

A thin shower door seal strip wears out quickly. Bathrooms are humid places, and the seal strip has to deal with water, temperature changes and frequent opening and closing of the door. A thin one will start to crack or break after just a few months. But a thicker shower door seal strip can handle more wear and tear. It has more material to stand up to the harsh bathroom environment. Some good quality thick shower door seal strips can last for years without needing replacement. That means you don’t have to keep buying new ones often, saving you money in the long run.

Not all shower doors are the same, and their thicknesses vary too. Some shower doors have 6mm thick glass, others have 10mm or even 12mm. If you choose a shower door seal strip that’s too thin for a thick glass door, it won’t wrap around the glass properly. The seal will be loose and won’t work well. On the other hand, a shower door seal strip that’s too thick for a thin glass door will be squeezed too much. It might get deformed over time and lose its sealing ability. So picking a shower door seal strip with the right thickness based on your shower door’s glass thickness ensures a perfect fit.

You might not know this, but a properly thick shower door seal strip can add a little extra stability to the shower door. When you close the door, the thick seal strip cushions the impact. It prevents the door from slamming too hard and reduces the noise. Also, if the shower door is a sliding one, a thick shower door seal strip can help the door slide more smoothly. It reduces friction between the door and the track, making the door last longer. A thin seal strip can’t do this well. It might not provide enough cushioning, and the door could get damaged more easily.

First, measure the thickness of your shower door glass. You can use a simple ruler for this. Write down the number, like 6mm or 8mm. Then, check the product information of the shower door seal strip. Most products will say which glass thickness they’re suitable for. If you’re not sure, you can ask the manufacturer. For example, if your glass is 8mm thick, a shower door seal strip that’s designed for 8mm glass is a safe choice. Also, consider the type of shower door. Sliding doors might need a slightly thicker seal strip than hinged doors to handle the sliding motion. Don’t just pick the thinnest one to save money. A good quality, properly thick shower door seal strip will give you better performance and last longer.